Specification:

1. Usage: automatic drilling and milling functions of circuit board;

2. Maximum size: 300mm×300mm;

3. Working mode: 2.5 D double-sided processing mode;

4. ★Control handle is made up of ARM + FPGA of embedded control system, there is double USB interface in control handle, realizing master-slave USB communication model, that is, as the main USB device, directly read U disk data, as the slave USB device, communicate with the computer, which can completely work off the computer;

5. All module driving mode, three step motor modules + driving chip united to drive XYZ axis moving;

6. ★Casting fuselage, Y axis moves driving beam arm move, in sculpture and drilling process, no displacement of circuit board;

7. Random configuration of processing data auxiliary processing software, data directly into the machine without any external software;

8. With function of X, Y, Z axis hardware and software limit;

9. High power spindle motor, higher processing precision, with memory function without electricity, no worries about outage;

10. ★Handle human-computer interface: 128 * 64 dot matrix liquid crystal display + 18 multi-function keys, with simple and intuitive operation;

11. Processing precision: ±0.01mm;

12. Repeat precision: 0.01mm;

13. Suitable drilling flower: 0.3mm~3mm  Drilling handle: 3.175mm;

14. Suitable milling cutter: 1MM~3MM  Cutter handle: 3.175MM;

15. Processing speed: 0～3m/min(actual-time adjustable);

16. Spindle motor: 800W frequency conversion motor The highest speed 60000 revolves/min;

17. Step motor: 35W four phase step motor*3;

18. Shaft driving mode: entire advanced screw driving;

19. Spindle movements itinerary: 60mm;

20. Self-contained mating PC control software, lifetime free upgrades;

21. Working power: AC220V/50Hz 1000W;

22. Overall dimension: main engine: length 620mm×width 750mm×height 500mm;control cabinet: length 200mm×width 300mm×height 550mm;

23. Net weight: 80KG.

Specification:

1. Usage: automatic drilling and milling functions of circuit board;

2. Maximum size: 300mm×300mm;

3. Working mode: 2.5 D double-sided processing mode;

4. ★Control handle is made up of ARM + FPGA of embedded control system, there is double USB interface in control handle, realizing master-slave USB communication model, that is, as the main USB device, directly read U disk data, as the slave USB device, communicate with the computer, which can completely work off the computer;

5. All module driving mode, three step motor modules + driving chip united to drive XYZ axis moving;

6. ★Casting fuselage, Y axis moves driving beam arm move, in sculpture and drilling process, no displacement of circuit board;

7. Random configuration of processing data auxiliary processing software, data directly into the machine without any external software;

8. With function of X, Y, Z axis hardware and software limit;

9. High power spindle motor, higher processing precision, with memory function without electricity, no worries about outage;

10. ★Handle human-computer interface: 128 * 64 dot matrix liquid crystal display + 18 multi-function keys, with simple and intuitive operation;

11. Processing precision: ±0.01mm;

12. Repeat precision: 0.01mm;

13. Suitable drilling flower: 0.3mm~3mm  Drilling handle: 3.175mm;

14. Suitable milling cutter: 1MM~3MM  Cutter handle: 3.175MM;

15. Processing speed: 0～3m/min(actual-time adjustable);

16. Spindle motor: 800W frequency conversion motor The highest speed 60000 revolves/min;

17. Step motor: 35W four phase step motor*3;

18. Shaft driving mode: entire advanced screw driving;

19. Spindle movements itinerary: 60mm;

20. Self-contained mating PC control software, lifetime free upgrades;

21. Working power: AC220V/50Hz 1000W;

22. Overall dimension: main engine: length 620mm×width 750mm×height 500mm;control cabinet: length 200mm×width 300mm×height 550mm;

23. Net weight: 80KG.