Basic functions:
1 Touch screen control, automatic self-checking on starting-up;
2 Protection alarm of water shortage and power failure;
3 Built-in RO membrane fouling prevention program, RO membrane-wash keys;
4 IC Microcomputer intelligent control;
5 Display of running condition and running parameters;
6 Function of water quality and quantity upgrading;
Basic technical parameters:
1 Water source: City tap water, water pressure1.0-5.0kg/cm2
2 RO membranes water production rate : 5-100L / H;
3 Continuous water flow: 1.5L/min;
4 Retention rate of Si> 99.9%;
5 Absorbance (254nm, 1cm light path): ≤ 0.001;
6 Particles (bigger than 0.22μm) content: <1/ml;
7 Heavy metals (ppm.max): <0.001;
8 Power Supply 220V/50Hz, voltage fluctuation rate of ± 10%;
9 working conditions: temperature 5-40 ℃, anti-freezing rooms are needed in cold areas;
10 Dimensions: 380 × 480 ×460 (mm).
Application scope | Provide pure water for conventional chemical and physical detection, solution preparation and equipment |
Mode | Molro 10a | 10L/hr | Outlet 1: resistance of III-class pure water is 0-10us/cm, conforming to China GB6682-92 of III class water standards and ASTM CAP NCCLS standards; |
Molro 20a | 20L/hr |
Molro 30a | 30L/hr |
Molro 40a | 40L/hr |
Molro 50a | 50L/hr |
Molro 60a | 60L/hr |
Optional configuration:
1 Pre-filter machine : when the mode name of the 200 model tap water ends with a letter “b”(high content of sediment suspensions);
2 Desalination device: When the water TDS> 400 (high salinity), the mode name of the tap water ends with a letter “d”;
3 Rust iron pre-processor : When iron content in water > 0.3PPm
Basic technical parameters:
1 Water source: City tap water, water pressure1.0-5.0kg/cm2
2 RO membranes water production rate : 5-100L / H;
3 Continuous water flow: 1.5L/min;
4 Retention rate of Si> 99.9%;
5 Absorbance (254nm, 1cm light path): ≤ 0.001;
6 Particles (bigger than 0.22μm) content: <1/ml;
7 Heavy metals (ppm.max): <0.001;
8 Power Supply 220V/50Hz, voltage fluctuation rate of ± 10%;
9 working conditions: temperature 5-40 ℃, anti-freezing rooms are needed in cold areas;
10 Dimensions: 380 × 480 ×460 (mm).
Application scope | Provide pure water for conventional chemical and physical detection, solution preparation and equipment |
Mode | Molro 10a | 10L/hr | Outlet 1: resistance of III-class pure water is 0-10us/cm, conforming to China GB6682-92 of III class water standards and ASTM CAP NCCLS standards; |
Molro 20a | 20L/hr |
Molro 30a | 30L/hr |
Molro 40a | 40L/hr |
Molro 50a | 50L/hr |
Molro 60a | 60L/hr |
Optional configuration:
1 Pre-filter machine : when the mode name of the 200 model tap water ends with a letter “b”(high content of sediment suspensions);
2 Desalination device: When the water TDS> 400 (high salinity), the mode name of the tap water ends with a letter “d”;
3 Rust iron pre-processor : When iron content in water > 0.3PPm
