Main Technical Parameters:

1.       Using PFA to paint the chamber, which is corrosion resistant and against high temperature, and can last for at least five years without corrosion

2.       Liquid crystal display, temperature-programmed, accurate temperature of the digestion tank, automatic cut-off of the microwave by over-temperature and active defense of accidental over-temperature

3.       Intelligent PID for auto-control to ensure the accuracy of sample digestion time and temperature

4.       Multiple active and passive safety measures: intelligent security alarm, "deflated overpressure relief" and "explosion-proof membrane"

5.       Digestion tank sheath  is one-shot casting with imported materials PEEK, which is against high temperature and pressure and is acid-corrosion-resistant; the inner tank is made of PTFE which are acid and alkali resistant, with capacity not less than 100ml. It is with good chemical stability and resistant to a high temperature of 250 ℃

6.       Overheat protection: When the box or external tank is overheated, the instrument will automatically trigger alarm and stop microwave radiation, it is with double-buffer explosion-proof door structure

7.       Microwave power: 1000W; Frequency: 2450MHz

8.       Using platinum resistance temperature control system for real-time display and temperature-control of the digestion tank, temperature-control range: 0-300 ℃, monitoring accuracy: 0.1 ℃ (with inspection certificate)

9.       Configure precision melt pressure sensor or a non-contact inductive FM Pressure Control can show real-time display and control pressure reaction tank, its control range :0.1-10MPa, precision 0.01Mpa.

10.   Can realize modes of high-pressure microwave digestion and microwave extraction

11.   At least six samples can be treated simultaneously (capacity ≥ 100m), and equipped with at least six sets of microwave digestion tank assembly

12.   All reaction tanks can be cooled fast outside the chamber with air or water, and the chamber is of good use

13.   Uniform chamber design ensures simultaneous treatment of all samples, using PFA to paint the chamber, with multiple high-temperature anti-corrosion coatings, preventing the chamber from acid and solvents corrosion 

14.   Equipped with larger-power ventilation system, thus all reactions can be done continuously under a ventilated, secure, and easy-for-observation condition

15.   Configuration:  microwave digestion host, 6 sets of PEEK outer tank, TFM six sets of the tank (capacity ≥ 100m), 2 sets of temperature sensors, pressure sensors, 1 set of 6 placed a plate, manual certificate must be equipped with other accessories

Main Technical Parameters:

1.       Using PFA to paint the chamber, which is corrosion resistant and against high temperature, and can last for at least five years without corrosion

2.       Liquid crystal display, temperature-programmed, accurate temperature of the digestion tank, automatic cut-off of the microwave by over-temperature and active defense of accidental over-temperature

3.       Intelligent PID for auto-control to ensure the accuracy of sample digestion time and temperature

4.       Multiple active and passive safety measures: intelligent security alarm, "deflated overpressure relief" and "explosion-proof membrane"

5.       Digestion tank sheath  is one-shot casting with imported materials PEEK, which is against high temperature and pressure and is acid-corrosion-resistant; the inner tank is made of PTFE which are acid and alkali resistant, with capacity not less than 100ml. It is with good chemical stability and resistant to a high temperature of 250 ℃

6.       Overheat protection: When the box or external tank is overheated, the instrument will automatically trigger alarm and stop microwave radiation, it is with double-buffer explosion-proof door structure

7.       Microwave power: 1000W; Frequency: 2450MHz

8.       Using platinum resistance temperature control system for real-time display and temperature-control of the digestion tank, temperature-control range: 0-300 ℃, monitoring accuracy: 0.1 ℃ (with inspection certificate)

9.       Configure precision melt pressure sensor or a non-contact inductive FM Pressure Control can show real-time display and control pressure reaction tank, its control range :0.1-10MPa, precision 0.01Mpa.

10.   Can realize modes of high-pressure microwave digestion and microwave extraction

11.   At least six samples can be treated simultaneously (capacity ≥ 100m), and equipped with at least six sets of microwave digestion tank assembly

12.   All reaction tanks can be cooled fast outside the chamber with air or water, and the chamber is of good use

13.   Uniform chamber design ensures simultaneous treatment of all samples, using PFA to paint the chamber, with multiple high-temperature anti-corrosion coatings, preventing the chamber from acid and solvents corrosion 

14.   Equipped with larger-power ventilation system, thus all reactions can be done continuously under a ventilated, secure, and easy-for-observation condition

15.   Configuration:  microwave digestion host, 6 sets of PEEK outer tank, TFM six sets of the tank (capacity ≥ 100m), 2 sets of temperature sensors, pressure sensors, 1 set of 6 placed a plate, manual certificate must be equipped with other accessories