Main Technical Parameters:

1. Using PFA to paint the chamber, which is corrosion resistant and against high temperature, 

and can last for at least five years without corrosion

2. Adopting plate microwave heating technology for sample digestion; better uniformity will be 

obtained if multiple samples are digested simultaneously
3. Liquid crystal display, temperature-programmed, accurate temperature of the digestion tank, automatic

 cut-off of the microwave by over-temperature and active defense of accidental over-temperature

4. Intelligent PID for auto-control to ensure the accuracy of sample digestion time and temperature

5. Multiple active and passive safety measures: intelligent security alarm, "deflated overpressure relief" 

and "explosion-proof membrane"

6. Microwave power: 2000W; Frequency: 2450MHz

7. Using platinum resistance temperature control system for real-time display and temperature-control of the

 digestion tank, temperature-control range: 0-300 ℃, monitoring accuracy: 0.1 ℃ (with inspection certificate)

8. Configure precision melt pressure sensor or a non-contact inductive FM Pressure Control can show real-time

 display and control pressure reaction tank, its control range :0.1-10MPa, precision 0.01Mpa

9. At least ten samples can be treated simultaneously (capacity ≥ 100m), and equipped with at least ten sets 

of microwave digestion tank assembly

10. Closed pressurized microwave digestion tank (requires patent certificate)

11. The tank using TFM (PTFE) capacity ≥ 100ml, outer tank is made of PEEK, high temperature, high pressure,

 resistance to acid corrosion

12. Uniform chamber design ensures simultaneous treatment of all samples, using PFA to paint the chamber, with 

multiple high-temperature anti-corrosion coatings, preventing the chamber from acid and solvents corrosion

13. 100ml large capacity Teflon digestion tank, the maximum pressure 10MPa, to ensure the safety of the sample fast 

digestion

14. Equipped with larger-power ventilation system, thus all reactions can be done continuously under a ventilated, secure, 

and easy-for-observation condition

15. Configuration: a microwave digestion instrument, PEEK digestion tank outer tank assembly 10 sets, TFM digestion 

tank tank (capacity ≥ 100ml) assembly 10 sets (including master a set), 2 sets of temperature sensors, one of the ten

 placed boards, manual certificate must be equipped with other accessories

Main Technical Parameters:

1. Using PFA to paint the chamber, which is corrosion resistant and against high temperature, and can last for at least five years without corrosion

2. Adopting plate microwave heating technology for sample digestion; better uniformity will be obtained if multiple samples are digested simultaneously
3. Liquid crystal display, temperature-programmed, accurate temperature of the digestion tank, automatic cut-off of the microwave by over-temperature and active defense of accidental over-temperature

4. Intelligent PID for auto-control to ensure the accuracy of sample digestion time and temperature

5. Multiple active and passive safety measures: intelligent security alarm, "deflated overpressure relief" and "explosion-proof membrane"

6. Microwave power: 2000W; Frequency: 2450MHz

7. Using platinum resistance temperature control system for real-time display and temperature-control of the digestion tank, temperature-control range: 0-300 ℃, monitoring accuracy: 0.1 ℃ (with inspection certificate)

8. Configure precision melt pressure sensor or a non-contact inductive FM Pressure Control can show real-time display and control pressure reaction tank, its control range :0.1-10MPa, precision 0.01Mpa

9. At least ten samples can be treated simultaneously (capacity ≥ 100m), and equipped with at least ten sets of microwave digestion tank assembly

10. Closed pressurized microwave digestion tank (requires patent certificate)

11. The tank using TFM (PTFE) capacity ≥ 100ml, outer tank is made of PEEK, high temperature, high pressure, resistance to acid corrosion

12. Uniform chamber design ensures simultaneous treatment of all samples, using PFA to paint the chamber, with multiple high-temperature anti-corrosion coatings, preventing the chamber from acid and solvents corrosion

13. 100ml large capacity Teflon digestion tank, the maximum pressure 10MPa, to ensure the safety of the sample fast digestion

14. Equipped with larger-power ventilation system, thus all reactions can be done continuously under a ventilated, secure, and easy-for-observation condition

15. Configuration: a microwave digestion instrument, PEEK digestion tank outer tank assembly 10 sets, TFM digestion tank tank (capacity ≥ 100ml) assembly 10 sets (including master a set), 2 sets of temperature sensors, one of the ten placed boards, manual certificate must be equipped with other accessories