Description： 

TR-TC-2028 apparatus for the determination of Water Washout Characteristics of Lubricating Greases conforms to the ASTM D1264 standard. This apparatus covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 and 79°C (100 and 175°F) under the prescribed laboratory conditions. It is not to be considered the equivalent of service evaluation tests. Precision and bias was determined using grease ranging from NLGI 3 to 0 grades in the research report 

Structure：

1．The apparatus adopts digital display temperature controller, the temperature control accuracy is high, easy to adjust.

2．Output adopts solid state relay without contact, sparkle, noise .got long operating life.

3．The apparatus base is made of stainless steel, good corrosion resistance. 

4．The apparatus adopts pump loop system

5．The motor driver device’s noise is low, got stable operation.

6．Reasonable design with attractive appearance.

Specification：

Technical parameters：

1. Rated voltage: AC 220V±10% 50Hz or 110V±10% 60Hz

2. Sink heating power: 500W

3. Sink temperature range: Room temperature ~ 100℃, continuously adjustable 

4. Control temperature accuracy: ± 2 ℃

5. Total power: 600 W

6. Spray water: 5 ± 0.5ml/s.

7. Bearing speed: 600 ± 30r/min

8. Ambient requirements: temperature: 20～30℃   Humidity≤85%

Specification

Technical parameters

1. Rated voltage: AC 220V±10% 50Hz or 110V±10% 60Hz

2. Sink heating power: 500W

3. Sink temperature range: Room temperature ~ 100℃, continuously adjustable 

4. Control temperature accuracy: ± 2 ℃

5. Total power: 600 W

6. Spray water: 5 ± 0.5ml/s.

7. Bearing speed: 600 ± 30r/min

8. Ambient requirements: temperature: 20～30℃   Humidity≤85%