The instrument is designed to meet the non-magnetic region inclinometer and directional control engineering drilling, exploration drilling, directional drilling, etc.   The instrument set of sensors, power supply, digital processing, and other units, a single point work independently and azimuth angle measurements drilling, without cable, no mechanical moving parts, reliable, cost-effective. The instrument can be widely used in engineering, hydrology, oil, coal, geology and other fields.

 

1. Inclinometer depth: ≤1500;

2. Measuring range and error:

       Angle measuring range: 0 ~ 50 °, measurement error: ± 0.2 °;

       Azimuth measuring range: 0 ~ 360 °;

        When the angle 1 ~ 3 °, the measurement error: ± 5.0 °;

         When the apex angle of 3 ~ 50 °, the measurement error: ± 3.0 °;

3. Measuring mode: single point measurement location;

4. Measurement delay time: (1 to 180) minutes adjustable;

5. Power supply: Built-in lithium battery, a charge lasts about 32 hours (new battery);

6. Inclinometer probe Overall: Ф40mm × 1320mm;

7. Environmental temperature: 0 ℃ ~ 55 ℃.

Main technical specifications

1. Inclinometer depth: ≤1500;

2. Measuring range and error:

       Angle measuring range: 0 ~ 50 °, measurement error: ± 0.2 °;

       Azimuth measuring range: 0 ~ 360 °;

        When the angle 1 ~ 3 °, the measurement error: ± 5.0 °;

         When the apex angle of 3 ~ 50 °, the measurement error: ± 3.0 °;

3. Measuring mode: single point measurement location;

4. Measurement delay time: (1 to 180) minutes adjustable;

5. Power supply: Built-in lithium battery, a charge lasts about 32 hours (new battery);

6. Inclinometer probe Overall: Ф40mm × 1320mm;

7. Environmental temperature: 0 ℃ ~ 55 ℃.