TR-line-3 Unilateral manual plugin line Print


PCB board Related

Contact us
COMPANY : Tryte Technology (H.K.) Limited
ADD : UNIT 04, 7/F, BRIGHT WAY TOWER, NO. 33 MONG KOK ROAD, KOWLOON, HONGKONG.
TEL:00852-2389298
FAX: 00852-35902333
CELL:0086-15367067787(Robin)
SITE : www.trytetc.com
SKYPE : live:myformat666
EMAIL : sale@trytetc.com
more>>>

TR-line-3 Unilateral manual plugin line Print
  • Name: TR-line-3 Unilateral manual plugin line Print
  • Model : TR-line-3
  • Erp code: 5000000113
    • | Share

TR-line-3.png


  1. Total width of the line is about 0.5 meters, the length of each station is 0.8 meters, unilateral 10 stations, the total length of a single line is 8 meters;

  2. Total height of the line is about 1.9 meters, working face height of the line is about 750mm±20mm;

  3. The plugin alloy orbit made of special aluminum profile, plugin flow operation by opening mode;

  4. Baseboard station made of plastic fire prevention board (δ = 18 mm), covered edge fully complying with the plugin flow process requirement;

  5. Frame made of A30 × 40 mm state standard square tube;

  6. Adjusting width by hand screw, high precision, adjusting width range about 50-300 mm (guide rail unilateral adjusting wide), in order to adapt to the different specifications of PCB and connection and wave soldering device connection;

  7. Top of flow line equipped with fluorescent lamp light source and lamp chimney;

  8. Each station configured: a piece of A4 transparent process board, 3 component boxes, a set of advertising rotating lamp, complete steel round stool (optional);

  9. Appearance treatment: sheet metal parts, rack with electrostatic powder coating processing;


  1. Total width of the line is about 0.5 meters, the length of each station is 0.8 meters, unilateral 10 stations, the total length of a single line is 8 meters;

  2. Total height of the line is about 1.9 meters, working face height of the line is about 750mm±20mm;

  3. The plugin alloy orbit made of special aluminum profile, plugin flow operation by opening mode;

  4. Baseboard station made of plastic fire prevention board (δ = 18 mm), covered edge fully complying with the plugin flow process requirement;

  5. Frame made of A30 × 40 mm state standard square tube;

  6. Adjusting width by hand screw, high precision, adjusting width range about 50-300 mm (guide rail unilateral adjusting wide), in order to adapt to the different specifications of PCB and connection and wave soldering device connection;

  7. Top of flow line equipped with fluorescent lamp light source and lamp chimney;

  8. Each station configured: a piece of A4 transparent process board, 3 component boxes, a set of advertising rotating lamp, complete steel round stool (optional);

  9. Appearance treatment: sheet metal parts, rack with electrostatic powder coating processing;



0