Specification:

1. Usage: automatic line carving, drilling and milling edge for circuit board;

2. Maximum working size: 400mm×320mm;

3. Working mode: 2.5 d double-sided processing mode;

4. ★Control handle is made up of ARM + FPGA of embedded control system, there is double USB interface in control handle, realizing master-slave USB communication model, that is, as the main USB device, directly read U disk data, as the slave USB device, communicate with the computer, which can completely work off the computer;

5. All module driving mode, three step motor modules + driving chip united to drive XYZ axis moving;

6. ★Casting fuselage, Y axis moves driving beam arm move, in sculpture and drilling process, no displacement of circuit board;

7. Random configuration of processing data auxiliary processing software, data directly into the machine without any external software;

8. With function of X, Y, Z axis hardware and software limit;

9. High power spindle motor, higher processing precision, with memory function without electricity, no worries about outage;

10. ★Handle human-computer interface: 128 * 64 dot matrix liquid crystal display + 18 multi-function keys, with simple and intuitive operation;

11. Processing precision: ±0.05mm;

12. Repeat precision: 0.01mm;

13. Minimum processing line width: 4mil; Minimum line gap 6 mil above;

14. Suitable milling cutter: 0.3mm~3.175mm Drilling handle: 3.175mm;

15. Suitable milling cutter: 1mm~3mm  Cutter handle: 3.175mm;

16. Processing speed: 0～3m/min(actual-time adjustable);

17. Spindle motor: 800W frequency conversion motor  The highest speed 60000 revolves/min;

18. Step motor: 35W four phase step motor*3;

19. Shaft driving mode: entire advanceding screw driving;

20. ★With mating PC control software, lifetime free upgrades;

21. Spindle movements itinerary: 60mm;

22. Working power: AC220V/50Hz 1000W;

23. Overall dimension: main engine: 620mm×750mm×500mm;control cabinet: 200mm×300mm×550mm;

24. Net weight: 105KG.

Specification:

1. Usage: automatic line carving, drilling and milling edge for circuit board;

2. Maximum working size: 400mm×320mm;

3. Working mode: 2.5 d double-sided processing mode;

4. ★Control handle is made up of ARM + FPGA of embedded control system, there is double USB interface in control handle, realizing master-slave USB communication model, that is, as the main USB device, directly read U disk data, as the slave USB device, communicate with the computer, which can completely work off the computer;

5. All module driving mode, three step motor modules + driving chip united to drive XYZ axis moving;

6. ★Casting fuselage, Y axis moves driving beam arm move, in sculpture and drilling process, no displacement of circuit board;

7. Random configuration of processing data auxiliary processing software, data directly into the machine without any external software;

8. With function of X, Y, Z axis hardware and software limit;

9. High power spindle motor, higher processing precision, with memory function without electricity, no worries about outage;

10. ★Handle human-computer interface: 128 * 64 dot matrix liquid crystal display + 18 multi-function keys, with simple and intuitive operation;

11. Processing precision: ±0.05mm;

12. Repeat precision: 0.01mm;

13. Minimum processing line width: 4mil; Minimum line gap 6 mil above;

14. Suitable milling cutter: 0.3mm~3.175mm Drilling handle: 3.175mm;

15. Suitable milling cutter: 1mm~3mm  Cutter handle: 3.175mm;

16. Processing speed: 0～3m/min(actual-time adjustable);

17. Spindle motor: 800W frequency conversion motor  The highest speed 60000 revolves/min;

18. Step motor: 35W four phase step motor*3;

19. Shaft driving mode: entire advanceding screw driving;

20. ★With mating PC control software, lifetime free upgrades;

21. Spindle movements itinerary: 60mm;

22. Working power: AC220V/50Hz 1000W;

23. Overall dimension: main engine: 620mm×750mm×500mm;control cabinet: 200mm×300mm×550mm;

24. Net weight: 105KG.