7-inch colored display, and delivers high bandwidth and sample rate under matchless  price point worldwide; Advanced Functionalities include automatic measurements,  advanced triggering modes, record length. Bring extraordinary user-friendliness  and measurement precision for debug, design, education,  quality control,  training, manufacturing test for a variety of industrial users.

Main Index And Parameters:

Bandwidth：      60 MHz

Real-time Sample Rate：     1GSa/s

Equivalent Sample Rate：    25GSa/s

Record Length(Sample Points) ：  Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional)

SEC/DIV Range：           4nS/div-40S/div (in a 2, 4, 8 sequence)

Delay Time Accuracy：     500ps

Vertical:

A/D Converter：     8-bit resolution, each channel sampled simultaneously

VOLTS/DIV Range：   2mV/div～5V/div at input BNC

Position Range：    ±50V(5V/div),±40V(2V/div～500mV/div),2V(200mV/div～50mV/div)±400mV(20mV/div～2mV/div)

Bandwidth Limit：   20MHz 

Rise Time at BNC：  ≤ 5.8ns

DC Gain Accuracy：  ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div

                    ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger：

"Trigger Sensitivity(Edge Trigger Type)" ：DC:     CH1/CH2(Typical)   1div from DC to 

                                                          10MHz;1.5div from 10MHz to Full

                                                EXT（Typical）     200mV from DC to 40MHz

                                                EXT/5（Typical）   1V from DC to 40MHz

                                                AC:     Attenuates signals below 10Hz

                                                HF Reject:      Attenuates signals above 80kHz

                                                LF Reject:      Attenuates signals below 150kHz

                                                Noise Reject:   Reduces trigger sensitivity

Trigger Level Range：   CH1,CH2:  ±8 divisions from center of screen

                                      EXT:±1.2V      EXT/5: ±6V

"Trigger Level Accuracy,typical (Accuracy is for signals having rise and fall times ≥20ns)" ：

                           CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)

                           EXT: ±(6% of setting + 40mV)

                           EXT/5: ±(6% of setting + 200mV)

Holdoff Range：          100ns-10s

Trigger Type：

Edge：           Trigger on the rising or falling edge

Pulse Width：   Trigger (when >,<,=,≠) on positive or negative pulses   Pulse Width Range: 20ns-10s

Video：          Trigger on an NTSC, PAL, or SECAM standard video signal   Line Range: 1-525 (NTSC), 

                        1-625 (PAL/SECAM)

Slope：          Trigger (when >,<,=,≠) on a positive or negative slope ；Set Time: 20ns–10s

Overtime：       From the rising or falling edge；Set Time: 20-10s

Alternate：      Internal trigger on edge, pulse width, video or slope

Measurement：

Cursors:  Manual: The difference between voltage cursors △V; the difference between time cursors

                                △T;  1/△T calculated by Hz.  

                Tracing: The voltage and time at a waveform point

Automatic:    Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive 

                Width, Negative Width

Display：

Type：        Right angle 7"TFT 16-digit color LCD

Resolution：  800*480 dots

Contrast：    16 gears, with the progress bar to show adjustment

Interface：   USB host and USB slave

Main Index And Parameters:

Bandwidth：      60 MHz

Real-time Sample Rate：     1GSa/s

Equivalent Sample Rate：    25GSa/s

Record Length(Sample Points) ：  Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional)

SEC/DIV Range：           4nS/div-40S/div (in a 2, 4, 8 sequence)

Delay Time Accuracy：     500ps

Vertical

A/D Converter：     8-bit resolution, each channel sampled simultaneously

VOLTS/DIV Range：   2mV/div～5V/div at input BNC

Position Range：    ±50V(5V/div),±40V(2V/div～500mV/div),2V(200mV/div～50mV/div)±400mV(20mV/div～2mV/div)

Bandwidth Limit：   20MHz 

Rise Time at BNC：  ≤ 5.8ns

DC Gain Accuracy：  ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div

                    ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger

"Trigger Sensitivity(Edge Trigger Type)" ：DC:     CH1/CH2(Typical)   1div from DC to 

                                                          10MHz;1.5div from 10MHz to Full

                                                EXT（Typical）     200mV from DC to 40MHz

                                                EXT/5（Typical）   1V from DC to 40MHz

                                                AC:     Attenuates signals below 10Hz

                                                HF Reject:      Attenuates signals above 80kHz

                                                LF Reject:      Attenuates signals below 150kHz

                                                Noise Reject:   Reduces trigger sensitivity

Trigger Level Range：   CH1,CH2:  ±8 divisions from center of screen

                                      EXT:±1.2V      EXT/5: ±6V

"Trigger Level Accuracy,typical (Accuracy is for signals having rise and fall times ≥20ns)" ：

                           CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)

                           EXT: ±(6% of setting + 40mV)

                           EXT/5: ±(6% of setting + 200mV)

Holdoff Range：          100ns-10s

Trigger Type

Edge：           Trigger on the rising or falling edge

Pulse Width：   Trigger (when >,<,=,≠) on positive or negative pulses   Pulse Width Range: 20ns-10s

Video：          Trigger on an NTSC, PAL, or SECAM standard video signal   Line Range: 1-525 (NTSC), 

                        1-625 (PAL/SECAM)

Slope：          Trigger (when >,<,=,≠) on a positive or negative slope ；Set Time: 20ns–10s

Overtime：       From the rising or falling edge；Set Time: 20-10s

Alternate：      Internal trigger on edge, pulse width, video or slope

Measurement

Cursors:  Manual: The difference between voltage cursors △V; the difference between time cursors

                                △T;  1/△T calculated by Hz.  

                Tracing: The voltage and time at a waveform point

Automatic:    Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive 

                Width, Negative Width

Display

Type：        Right angle 7"TFT 16-digit color LCD

Resolution：  800*480 dots

Contrast：    16 gears, with the progress bar to show adjustment

Interface：   USB host and USB slave