Product Description:
The instrument can detect winch, wheel speed, hook load, stand pipe pressure, pump and other engineering parameters and the whole red hydrocarbon content to complete gas logging, drilling record and drilling management, etc.

Main Features:
1. Compared with other instruments of this type, this instrument is of small size, compact structure, easy installation and maintenance, etc.
2. Using USB interface for data acquisition, not only can be installed in an ordinary computer, but also in notebooks;
3. In addition to the general functions of common geological logging instruments, it has the advantages of gas logging and no pipeline delay, which ensures real-time detection of oil and gas shows and measuring aftereffect;
4. The gas sensor is adaptable, able to work under high concentration of gas, which provides solution to logging under the situation of mixed oil;
5. It has good cost performance and can be greatly promoted among development wells.

Main technical parameters:

1. Hydrocarbon content (methane)

1. Sensitivity:> 16mv

2. Measurement Range: 0 ~ 100LEL

3. Response time: <10s

2. Rotary speed of the wheel

1. Measurement range: 0 ~ 300r/min

2. Error <1r/min

3. Vertical / Casing pipe pressure

1. Measurement range: 0 ~ 40Mpa

2. Accuracy: 2% of full scale

4. Pump stroke

1. Measurement range: 0 ~ 400 red / min

2. Error: <1 stroke / min

5. Hook parameter tester

1. Measurement range: 0 ~ 9999.99m

2. Accuracy: 1% (single)

3. Measurement range: 0 ~ 2400KN, 0 ~ 4000KN

4. Accuracy: 2%

5. Hook load

6. Well depth

6. Bit position
Measurement range: 0 ~ 9999.99 meters
Accuracy: 1.5%
7. The position set of hook: 0 ~ 45.00m
Display interval: 0.01m

Main technical parameters:

1. Hydrocarbon content (methane)

1. Sensitivity:> 16mv

2. Measurement Range: 0 ~ 100LEL

3. Response time: <10s

2. Rotary speed of the wheel

1. Measurement range: 0 ~ 300r/min

2. Error <1r/min

3. Vertical / Casing pipe pressure

1. Measurement range: 0 ~ 40Mpa

2. Accuracy: 2% of full scale

4. Pump stroke

1. Measurement range: 0 ~ 400 red / min

2. Error: <1 stroke / min

5. Hook parameter tester

1. Measurement range: 0 ~ 9999.99m

2. Accuracy: 1% (single)

3. Measurement range: 0 ~ 2400KN, 0 ~ 4000KN

4. Accuracy: 2%

5. Hook load

6. Well depth

6. Bit position
Measurement range: 0 ~ 9999.99 meters
Accuracy: 1.5%
7. The position set of hook: 0 ~ 45.00m
Display interval: 0.01m