Specially designed high temperature combustion tube with secondary combustion
function, makes sure the samples are combusted thoroughly.
High Automation
The analyzer will introduce, test, and discard the samples automaticallywithout
attendance, high temperature radiation damage to the eyes
is avoided..
Ultra-low drift infrated cell lowers the frequency of drift calibration.
Withself-developed ultra low drift infrared cell guarantees, accurate test is
obtained.
High Capacity
Up to 50 samples can be loaded once.
High Test Efficiency
Analysis Time per sample is less than 110s, total analysis time per sample < 3
minutes.
Intelligent Control
. Easy-to-use Windows-based software: It only needs to click the mouse after
weighing and placing the samples.
. Easy data handling, real time data can be transmitted by internal network.
. With CAN bus interface for controlling.
Application:
TRYTE TR-DS350 Infrared Sulfur Analyzer is used to determine the sulfur content in coal, coke, ash, biomass fuels and other combustibles in fields of power plants, coal mines, paper making, metallurgy, petrochemical, steel factory, etc..
Conformance of Standards:
ISO 19579：2006 Solid mineral fuels – Determination of sulfur by IR spectrometry
ASTM—D4239—12 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
GB/T 25214-2010 Determination of Total Sulfur in Coal by IR Spectrometry
Specifications:
Method: Infrared absorption
Test Range：0.01%-50% (Possible to Extend up to 100%)
Sample Weight：100~500mg
Recommended Weight:（300±50）mg
Analysis Time：≤ 2 min per sample
Autoloader:50 Samples
Furnace Working Temperature：1250~1350℃
Temprature control accuracy : min ± 5° C
Pressure of Oxygen Source: ≥1MPa
Gas Requirement: Oxygen (99.5% purity)
Power Requirement:220 V（-15%-10%），50Hz
Max Power: 4kW
