TR-NY-ZDK300 Circuit board carving machine


COMPANY : Tryte Technology (H.K.) Limited
ADD : UNIT 04, 7/F, BRIGHT WAY TOWER, NO. 33 MONG KOK ROAD, KOWLOON, HONGKONG.
TEL:00852-2389298
FAX: 00852-35902333
CELL:0086-15367067787(Robin)
SITE : www.trytetc.com
SKYPE : live:myformat666
EMAIL : sale@trytetc.com
more>>>

  • Name: TR-NY-ZDK300 Circuit board carving machine
  • Model : TR-NY-ZDK300
  • Erp code: 9000001164
  • | Share

TR-NY-ZDK300.jpg

Specification:

  1. Usage: automatic line carving, drilling and milling edge for circuit board;

  2. Maximum working size: 300mm×300mm;

  3. Working mode: 2.5 d double-sided processing mode;

  4. ★Control handle is made up of ARM + FPGA of embedded control system, there is double USB interface in control handle, realizing master-slave USB communication model, that is, as the main USB device, directly read U disk data, as the slave USB device, communicate with the computer, which can completely work off the computer;

  5. All module driving mode, three step motor modules + driving chip united to drive XYZ axis moving;

  6. ★Casting fuselage, Y axis moves driving beam arm move, in sculpture and drilling process, no displacement of circuit board;

  7. Random configuration of processing data auxiliary processing software, data directly into the machine without any external software;

  8. With function of X, Y, Z axis hardware and software limit;

  9. High power spindle motor, higher processing precision, with memory function without electricity, no worries about outage;

  10. ★Handle human-computer interface: 128 * 64 dot matrix liquid crystal display + 18 multi-function keys, with simple and intuitive operation;

  11. Processing precision: ±0.05mm;

  12. Repeat precision: 0.01mm;

  13. Minimum processing line width: 4mil;Minimum line gap 6 mil above;

  14. Suitable drilling flower: 0.3mm~3.175mm Drilling handle: 3.175mm;

  15. Suitable milling cutter: 1mm~3mm Cutter handle: 3.175mm;

  16. Processing speed: 0~3m/min(actual-time adjustable);

  17. Spindle motor: 800W frequency conversion motor  The highest speed 40000 revolves/min;

  18. Step motor: 35W four phase step motor*3;

  19. Shaft driving mode: entire advanceding screw driving;

  20. Spindle movements itinerary: 60mm;

  21. ★With mating PC control software, lifetime free upgrades;

  22. Working power: AC220V/50Hz 1000W;

  23. Overall dimension: main engine: 580mm×610mm×550m  control cabinet: 400mm×250mm×590mm;

  24. Net weight: 105KG.

2.jpg

Specification:

  1. Usage: automatic line carving, drilling and milling edge for circuit board;

  2. Maximum working size: 300mm×300mm;

  3. Working mode: 2.5 d double-sided processing mode;

  4. ★Control handle is made up of ARM + FPGA of embedded control system, there is double USB interface in control handle, realizing master-slave USB communication model, that is, as the main USB device, directly read U disk data, as the slave USB device, communicate with the computer, which can completely work off the computer;

  5. All module driving mode, three step motor modules + driving chip united to drive XYZ axis moving;

  6. ★Casting fuselage, Y axis moves driving beam arm move, in sculpture and drilling process, no displacement of circuit board;

  7. Random configuration of processing data auxiliary processing software, data directly into the machine without any external software;

  8. With function of X, Y, Z axis hardware and software limit;

  9. High power spindle motor, higher processing precision, with memory function without electricity, no worries about outage;

  10. ★Handle human-computer interface: 128 * 64 dot matrix liquid crystal display + 18 multi-function keys, with simple and intuitive operation;

  11. Processing precision: ±0.05mm;

  12. Repeat precision: 0.01mm;

  13. Minimum processing line width: 4mil;Minimum line gap 6 mil above;

  14. Suitable drilling flower: 0.3mm~3.175mm Drilling handle: 3.175mm;

  15. Suitable milling cutter: 1mm~3mm Cutter handle: 3.175mm;

  16. Processing speed: 0~3m/min(actual-time adjustable);

  17. Spindle motor: 800W frequency conversion motor  The highest speed 40000 revolves/min;

  18. Step motor: 35W four phase step motor*3;

  19. Shaft driving mode: entire advanceding screw driving;

  20. Spindle movements itinerary: 60mm;

  21. ★With mating PC control software, lifetime free upgrades;

  22. Working power: AC220V/50Hz 1000W;

  23. Overall dimension: main engine: 580mm×610mm×550m  control cabinet: 400mm×250mm×590mm;

  24. Net weight: 105KG.


0